Solution Description

 

Solution Description

 

Item Description

-S Sequence Helical gearbox
 

 

Item Characteristics
1.Higher modular design and style.
2.Built-in casting housing,compact dimension,large loading help, steady transmitting and lower sounds amount.
three.With the unique equipment geometry, it gets large torque, performance and extended life circle.
four.It can achieve the immediate mixture for 2 sets of gearbox.
5.Large effectiveness and save electrical power.

six.Preserve value and reduced maintenance.

 

Merchandise Parameters

1. Technical data

Size 38 48 58 68 78 88 98
Construction BS   BSA   BSF   BSAF   BSAT   BSAZ
Input Power(kW) .eighteen~.75 .eighteen~1.5 .18~three .twenty five~5.five .fifty five~7.5 .75~fifteen 1.5~22
Ratio ten.27~165.seventy one 11.forty six~244.seventy four 10.78~196.21 11.55~227.20 nine.ninety six~241.09 11.eighty three~223.26 twelve.75~230.48
Permissible Torque(N.m) ninety a hundred and seventy 300 520 1270 2280 4000
Bodyweight(kg) seven ten 14 26 50 one hundred one hundred seventy

two: Design and style selection
 

S series gear units are available in the following designs
S…Y… Foot-mounted parallel shaft helical gear units with solid shaft
SA…Y… Parallel shaft helical gear units with hollow shaft
SAZ…Y… Quick-flange mounted parallel shaft helical gear units with hollow shaft
SF…Y… Flange-mounted parallel shaft helical gear units with solid shaft
SAT…Y… Flange-mounted parallel shaft helical gear units with hollow shaft
S(SF,SA,SAF,SAZ)S… Shaft input parallel shaft helical gear units
S(SF,SA,SAF,SAZ)…R…Y… Combinatorial parallel shaft helical gear units
S(SF,SA,SAF,SAZ)S…R… Shaft input combinatorial parallel shaft helical gear units

 

Supplies Info Sheet

Housing substance

Grey Solid iron

Housing hardness

HBS163~255

Equipment material

20CrMnTi alloy steel

Floor hardness of gears

HRC58°~sixty two °

Equipment core hardness

HRC33~forty eight

Enter / Output shaft substance

40Cr alloy metal

Enter / Output shaft hardness

HRC32~36

Machining precision of gears

correct grinding, 6~5 Grade

Lubricating oil

GB L-CKC220-460, Shell Omala220-460

Heat therapy

tempering, cementiting, quenching, normalizing, etc.

Performance

ninety four%~96% (is dependent on the transmission stage)

Sound (MAX)

60~68dB

Temp. increase (MAX)

40°C

Temp. rise (Oil)(MAX)

50°C

Vibration

≤20µm

Backlash

≤20Arcmin

Brand name of bearings

China top brand name bearing, HRB/LYC/ZWZ/C&U. Or other makes requested, SKF, FAG, INA, NSK.

Brand name of oil seal

NAK — ZheJiang or other makes requested

 

Thorough Pictures

 

 

Our method of creation

 

 

Our product line

 

 

Company Profile

 

Business Profile

Bode  was launched in 2007, which is located in HangZhou metropolis, ZHangZhoug province. As 1 specialist manufacturer and exporter, we have far more than seventeen years’ experience in R & D of worm reducer, equipment reducer, gearbox , AC motor and relative spare elements. We have factory with innovative manufacturing and test tools, the robust advancement of team and creating potential provide our clients with high quality items. Our goods widely served to different industries of Metallurgy, Chemical substances, lifting, mining, Petroleum, textile, medicine, picket and so on. Main marketplaces: China, Africa, Australia, Vietnam, Turkey, Japan, Korea, Philippines… Welcome to request us any queries, excellent provide usually for you for long phrase business.

FAQ

Q1: Are you buying and selling company or producer?
A: We are manufacturing unit.

Q2: What types of gearbox can you make for us?
A: Principal merchandise of our company: R, S, K, F sequence helical-tooth reducer, RV collection worm gear reducer,H Collection Parallel Shaft Helical Reduction Gear Box

Q3: Can you make as for each personalized drawing?
A: Yes, we offer customized service for consumers.

This fall: Can we buy 1 personal computer of every product for quality screening?
A: Indeed, we are happy to acknowledge demo get for high quality testing.

Q5: What details shall we give before inserting a buy order?
A:  a) Variety of the gearbox, ratio, input and output sort, enter flange, mounting position, and motor informationetc.
     b) Housing colour.
     c) Obtain quantity.
     d) Other specific needs.

Q6: How lengthy is your shipping and delivery time?
A: Generally it is 5-10 times if the items are in stock. or it is fifteen-20 days if the merchandise are not in inventory.

Q7: What is your phrases of payment ?
A: thirty% Advance payment by T/T following signing the deal.70% just before shipping

If you are interested in our item, welcome to get in touch with with us.
Our crew will do our greatest to meet your need 🙂 
 

 

US $90-5,500
/ Piece
|
1 Piece

(Min. Order)

###

Application: Motor, Machinery, Marine, Agricultural Machinery
Function: Distribution Power, Change Drive Torque, Speed Changing, Speed Reduction
Layout: Coaxial
Hardness: Hardened Tooth Surface
Installation: Horizontal Type
Step: Double-Step

###

Samples:
US$ 90/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Size 38 48 58 68 78 88 98
Structure BS   BSA   BSF   BSAF   BSAT   BSAZ
Input Power(kW) 0.18~0.75 0.18~1.5 0.18~3 0.25~5.5 0.55~7.5 0.75~15 1.5~22
Ratio 10.27~165.71 11.46~244.74 10.78~196.21 11.55~227.20 9.96~241.09 11.83~223.26 12.75~230.48
Permissible Torque(N.m) 90 170 300 520 1270 2280 4000
Weight(kg) 7 10 14 26 50 100 170

###

S series gear units are available in the following designs
S…Y… Foot-mounted parallel shaft helical gear units with solid shaft
SA…Y… Parallel shaft helical gear units with hollow shaft
SAZ…Y… Short-flange mounted parallel shaft helical gear units with hollow shaft
SF…Y… Flange-mounted parallel shaft helical gear units with solid shaft
SAT…Y… Flange-mounted parallel shaft helical gear units with hollow shaft
S(SF,SA,SAF,SAZ)S… Shaft input parallel shaft helical gear units
S(SF,SA,SAF,SAZ)…R…Y… Combinatorial parallel shaft helical gear units
S(SF,SA,SAF,SAZ)S…R… Shaft input combinatorial parallel shaft helical gear units

###

Housing material
Grey Cast iron
Housing hardness
HBS163~255
Gear material
20CrMnTi alloy steel
Surface hardness of gears
HRC58°~62 °
Gear core hardness
HRC33~48
Input / Output shaft material
40Cr alloy steel
Input / Output shaft hardness
HRC32~36
Machining precision of gears
accurate grinding, 6~5 Grade
Lubricating oil
GB L-CKC220-460, Shell Omala220-460
Heat treatment
tempering, cementiting, quenching, normalizing, etc.
Efficiency
94%~96% (depends on the transmission stage)
Noise (MAX)
60~68dB
Temp. rise (MAX)
40°C
Temp. rise (Oil)(MAX)
50°C
Vibration
≤20µm
Backlash
≤20Arcmin
Brand of bearings
China top brand bearing, HRB/LYC/ZWZ/C&U. Or other brands requested, SKF, FAG, INA, NSK.
Brand of oil seal
NAK — Taiwan or other brands requested
US $90-5,500
/ Piece
|
1 Piece

(Min. Order)

###

Application: Motor, Machinery, Marine, Agricultural Machinery
Function: Distribution Power, Change Drive Torque, Speed Changing, Speed Reduction
Layout: Coaxial
Hardness: Hardened Tooth Surface
Installation: Horizontal Type
Step: Double-Step

###

Samples:
US$ 90/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Size 38 48 58 68 78 88 98
Structure BS   BSA   BSF   BSAF   BSAT   BSAZ
Input Power(kW) 0.18~0.75 0.18~1.5 0.18~3 0.25~5.5 0.55~7.5 0.75~15 1.5~22
Ratio 10.27~165.71 11.46~244.74 10.78~196.21 11.55~227.20 9.96~241.09 11.83~223.26 12.75~230.48
Permissible Torque(N.m) 90 170 300 520 1270 2280 4000
Weight(kg) 7 10 14 26 50 100 170

###

S series gear units are available in the following designs
S…Y… Foot-mounted parallel shaft helical gear units with solid shaft
SA…Y… Parallel shaft helical gear units with hollow shaft
SAZ…Y… Short-flange mounted parallel shaft helical gear units with hollow shaft
SF…Y… Flange-mounted parallel shaft helical gear units with solid shaft
SAT…Y… Flange-mounted parallel shaft helical gear units with hollow shaft
S(SF,SA,SAF,SAZ)S… Shaft input parallel shaft helical gear units
S(SF,SA,SAF,SAZ)…R…Y… Combinatorial parallel shaft helical gear units
S(SF,SA,SAF,SAZ)S…R… Shaft input combinatorial parallel shaft helical gear units

###

Housing material
Grey Cast iron
Housing hardness
HBS163~255
Gear material
20CrMnTi alloy steel
Surface hardness of gears
HRC58°~62 °
Gear core hardness
HRC33~48
Input / Output shaft material
40Cr alloy steel
Input / Output shaft hardness
HRC32~36
Machining precision of gears
accurate grinding, 6~5 Grade
Lubricating oil
GB L-CKC220-460, Shell Omala220-460
Heat treatment
tempering, cementiting, quenching, normalizing, etc.
Efficiency
94%~96% (depends on the transmission stage)
Noise (MAX)
60~68dB
Temp. rise (MAX)
40°C
Temp. rise (Oil)(MAX)
50°C
Vibration
≤20µm
Backlash
≤20Arcmin
Brand of bearings
China top brand bearing, HRB/LYC/ZWZ/C&U. Or other brands requested, SKF, FAG, INA, NSK.
Brand of oil seal
NAK — Taiwan or other brands requested

Advantages and disadvantages of worm gear reducer

If you are looking for a worm gear reducer, you have come to the right place. This article will cover the pros and cons of worm gear reducers and discuss the different types available. You will learn about multi-head worm gear reducers, hollow shaft worm gear reducers as well as hypoid gear sets and motors.
worm_reducer

Hollow shaft worm gear reducer

Hollow shaft worm gear reducers are used to connect two or more rotating parts. They are available in single-axis and dual-axis versions and can be connected to various motor types. They can also have different ratios. The ratios of these gear reducers depend on the quality of the bearings and assembly process.
Hollow shaft worm gear reducers are made of bronze worm gears and cast iron hubs. The gears are lubricated with synthetic oil. They are lightweight and durable. They can be installed in various engine housings. Additionally, these gear reducers are available in a variety of sizes. The range includes 31.5, 40, 50, 63, and 75mm models. Other sizes are available upon request.
In addition to worm gear reducers, there are also helical gear reducers. These reducers can achieve very low output speeds. They are also suitable for all-around installations. In addition, the advantage of a multi-stage reducer is that it is more efficient than a single-stage gear reducer. They also feature low noise, low vibration, and low energy consumption.
Hollow shaft worm gear reducers are generally less expensive and last longer. They are also a suitable replacement for solid shaft gearboxes for machines that require high torque without compromising strength. Typical gear arrangements include worm, spur, helical and bevel gears. Gear ratio is the ratio of input torque to output torque.

Multi-head worm gear reducer

The multi-head worm gear reducer is used to reduce the speed of the machine. It uses friction to hold the worm in place while transmitting power. These gears can also be called ground worms and hardened worm gears. They are useful in conveying systems and most engineering applications.
Multiple worm reducers have a large number of gear ratios. These gear designs have a central cross-section that forms the front and rear boundaries of the worm gear. This design is a better choice than other worm gears because it is less prone to wear and can be used with a variety of motors and other electronics.
Adjustable multi-head worm gear reducer to reduce axial play. Usually, the backlash on the left and right sides of the worm is the same. However, if you need less backlash, you can buy a double lead worm gear. This design is ideal for precision applications requiring small clearances. The lead of the opposing teeth of the double worm gear is different from the right side, so the backlash can be adjusted without adjusting the center distance between the worm gears.
Worm gear reducers are available from a variety of manufacturers. Many gear manufacturers stock these gears. Since the gear ratios are standardized, there is no need to adjust the height, diameter, or length of the shaft. Worm gears have fewer moving parts, which means they require less maintenance.
worm_reducer

Hypoid Gear Set

Worm gears are the most common type of gear. While these gears are great for high-to-low ratios, hypoid gear sets are much more efficient in all ratios. This difference is due to higher torque density, better geometry and materials, and the way hypoid gears transmit force differently than worm gears.
Hypoid gear sets have curved helical teeth. This results in smooth gear meshing and little noise. This is because the hypoid gears start to slowly contact each other, but the contact progresses smoothly from tooth to tooth. This reduces friction and wears, thereby increasing the efficiency of the machine.
The main advantages of hypoid gears over worm gears are higher torque capacity and lower noise levels. Although their upfront cost may be higher, hypoid gears are more efficient than worm gears. They are able to handle higher initial inertia loads and can deliver more torque with a smaller motor. This saves money in the long run.
Another advantage of hypoid gears is the lower operating temperature. They also do not require oil lubrication or ventilation holes, reducing maintenance requirements. The hypoid gear set is maintenance-free, and the grease on the hypoid gear set lasts for decades.

Hypoid gear motor

A hypoid gear motor is a good choice for a worm gear reducer as it allows for a smaller motor and more efficient energy transfer. In fact, a 1 hp motor driving a hypoid reducer can provide the same output as a 1/2 hp motor driving a worm reducer. A study by Nissei compared two gear reduction methods and determined that a hypoid gear motor produces more torque and power than a worm reducer when using a fixed reduction ratio of 60:1. The study also showed that the 1/2 HP hypoid gear motor is more energy efficient and reduces electricity bills.
Worm reducers run hotter than hypoid gears, and the added heat can shorten their lifespan. This can cause components to wear out faster, and the motor may require more frequent oil changes. In addition, hypoid gear motors are more expensive to manufacture.
Compared to worm gears, hypoid gears offer higher efficiency and lower operating noise. However, they require additional processing techniques. They are made of bronze, a softer metal capable of absorbing heavy shock loads. Worm drives require work hardening and are less durable. Operating noise is reduced by up to 30%, and hypoid gears are less prone to breakage than bevel gears.
Hypoid gear motors are prized for their efficiency and are used in applications requiring lower torque. A unique hypoid tooth profile reduces friction. In addition, hypoid gear motors are ideal for applications where space is limited. These geared motors are often used with pulleys and levers.

R series worm gear reducer

R series worm gear reducers have a variety of characteristics that make them ideal for different applications. Its high rigidity cast iron housing and rigid side gears are designed for smooth drive and low noise. It also features high load capacity and long service life. Additionally, it can be assembled into many different configurations as required.
High efficiency, large output torque and good use efficiency. It comes in four basic models ranging from 0.12KW to 200KW. It can be matched with right angle bevel gearbox to provide large speed ratio and high torque. This combination is also suitable for low output and high torque.
worm_reducer

AGKNX Electric Worm Gear Reducer

AGKNX Electric worm gear reducers are available with NEMA C-face mounting flanges for a variety of motors. These reducers feature double lip oil seals, an aluminum alloy housing, and two bearings on the input and output shafts. These reducers are rust-proof and have epoxy paint on the inside. They are available in a variety of ratios, from 7.5:1 to 100:1.
Worm reducers are one of the most cost-effective and compact gears. These reducers increase output torque while reducing input speed. AGKNX Electric’s worm gear reducers are pre-installed with Mobil SHC634 Synthetic Gear Oil. These reducers have an internal oil gallery guide to protect the shaft. They also have a one-piece cast iron housing.
AGKNX Electric Corporation is the leading independent distributor of electric motors in the United States. They have eight strategically located warehouses, enabling them to ship most orders on the same day. They offer motors of various sizes up to 20,000 hp. They also offer a variety of motor controls and variable speed drives.
China S68 Series Helical Worm Gear Box with Inline Motor     helical worm gearboxChina S68 Series Helical Worm Gear Box with Inline Motor     helical worm gearbox
editor by czh 2022-11-29